mask sewing
3
stories in this section
-

How to Use Interfacing in a Face Mask
Quick answer: Interfacing for a face mask is best as non-woven fusible, pressed onto the cotton with a pressing cloth and trimmed inside the seam allowance. Test on a scrap first, because heat and glue behave differently by product. This technique sits inside the wider process of how to sew a face mask. The steps…
-

How to Sew Thick Layers Without Puckering
To learn how to sew multiple layers of fabric without puckering, fit a walking foot so the top layer feeds as fast as the bottom, hold the layers with clips, and stitch slowly in straight lines. Corners and pleats need extra care. This guide suits anyone building layered masks, and it complements the wider how…
-

How to Clip, Turn and Press Mask Seams
Symptom First action Planning use Corners look blunt or lumpy Trim the corner allowance diagonally before turning Do this while the mask is still inside out Curved edges pucker or pull Cut small notches into the curved allowance Notch only up to, never through, the stitching Seam edge rolls to the wrong side Press the…